Print Profile : n-vent mini medium settings from LulzBot.com with no adjustments.
Notes : Forgot to put down the PVA glue and had to spend some extra effort in getting on of the parts off. Print was pretty clean, some edges had a little curling near the top and I think it may be that the layer print time was to quick and did not allow the material to cool properly first.
Run time: ~4.5hrs
Cura Execution Output :
< Bed x: 0.00 y: 0.00 z: -1.36 < Bed x: 160.00 y: 0.00 z: -0.80 < Bed x: 160.00 y: 160.00 z: -0.80 < Bed x: 0.00 y: 160.00 z: -1.57 < Eqn coefficients: a: 0.00 b: -0.00 d: -1.41 < planeNormal x: -0.00 y: 0.00 z: 1.00 < Probing done! < echo:endstops hit: Z:-1.57 < < echo:Marlin1.0.0 < echo: Last Updated: Sep 4 2015 08:36:38 | Author: (Aleph Objects Inc, Mini-2015Q1) < Compiled: Sep 4 2015 < echo: Free Memory: 4882 PlannerBufferBytes: 1296 < echo:Hardcoded Default Settings Loaded < echo:Steps per unit: < echo: M92 X100.50 Y100.50 Z1600.00 E833.00 < echo:Maximum feedrates (mm/s): < echo: M203 X800.00 Y800.00 Z8.00 E40.00 < echo:Maximum Acceleration (mm/s2): < echo: M201 X9000 Y9000 Z100 E1000 < echo:Acceleration: S=acceleration, T=retract acceleration < echo: M204 S2000.00 T3000.00 < echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s) < echo: M205 S0.00 T0.00 B20000 X12.00 Z0.40 E10.00 < echo:Home offset (mm): < echo: M206 X0.00 Y0.00 Z0.00 < echo:PID settings: < echo: M301 P28.79 I1.91 D108.51
